MSI G272QPF E2 user manual

Contents

1. Getting Startedp. 3

   This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded…

2. Installing the Monitor Standp. 4

   1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the…

3. Adjusting the Monitorp. 5

   This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠Important •Avoid touching the display panel when adjusting the…

4. Monitor Overviewp. 6
5. Connecting the Monitor to PCp. 8

   1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4.…

6. OSD Setupp. 9

   This chapter provides you with essential information on OSD Setup. ⚠Important All information is subject to change without prior notice

7. Navi Keyp. 9

   The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: •selecting function…

8. Hot Keyp. 9

   Users may enter into preset function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive. •Users may customize their own Hot…

9. OSD Menusp. 10

   ⚠Important The following settings will be grayed out when HDR signals are received: •Night Vision •MPRT •Low Blue Light •HDCR •Brightness •Contrast •Color…

10. Gamingp. 11

    1st Level Menu 2nd/3rd Level Menu Description Game Mode User •Use Up or Down Button to select and preview mode effects. •Press the OK Button to confirm and…

11. Professionalp. 13

    1st Level Menu 2nd Level Menu Description Pro Mode Eco •Use Up or Down Button to select and preview mode effects. •Press the OK Button to confirm and apply…

12. Imagep. 14

    1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 •Properly adjust Brightness according to the surrounding lighting. Contrast 0-100 •Properly…

13. Input Sourcep. 14

    1st Level Menu 2nd Level Menu Description HDMI™ 1 •Users can adjust Input Source in any mode. HDMI™ 2 DP Auto Scan OFF •Users can use the Navi Key to select…

14. Navi Keyp. 15

    1st Level Menu 2nd Level Menu Description Up Down Left Right OFF •All Navi Key items can be adjusted via OSD Menus. Brightness Game Mode Smart Crosshair Alarm…

15. Settingsp. 15

    1st Level Menu 2nd Level Menu Description Language 繁體中文 •Users have to press the OK Button to confirm and apply the Language setting. •Language is an…

16. Specificationsp. 17

    Monitor G272QPF E2 Size 27 inch Curvature Flat Panel Type Rapid IPS Resolution 2560x1440 (WQHD) Aspect Ratio 16:9 Brightness 300 nits (typ.) Contrast Ratio…

17. Preset Display Modesp. 19

    ⚠Important All information is subject to change without prior notice. Standard Resolution HDMI™ DP VGA 640x480 @60Hz V V @67Hz V V @72Hz V V @75Hz V V SVGA…

18. Troubleshootingp. 21

    The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer…

19. Safety Instructionsp. 22

    Read the safety instructions carefully and thoroughly. •All cautions and warnings on the device or User Guide should be noted. •Refer servicing to qualified…

20. TÜV Rheinland Certificationp. 24

    TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue…

21. Regulatory Noticesp. 25

    CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to…