BenQ LU960 (9H.JN477.25E) user manual

Contents

1. Copyright and disclaimerp. 2

   Copyright Copyright 2021 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval…

2. Important safety instructionsp. 6

   Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product…

3. Introductionp. 14

   Projector exterior view Front and upper side view 1. Side vent (air inlet) 2. Focus adjustment 3. Zoom 4. Len shift 5. Projection lens 6. LIGHT SOURCE…

4. Installationp. 21

   Lens Cap / Lens Lock 1. Remove lens cap before booting. 2. Install lens lock 3. Secure with screws, do not fully tighten 4. Adjust the focus 5. Tighten the…

5. Operationsp. 29

   Switch on/off the projector Connecting the power cord Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where…

6. Using the menup. 37

   Main menu The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu.…

7. Maintenancep. 62

   Before maintaining the projector • Make sure to turn off the power before maintaining the projector. • When switching off the projector, make sure to follow…

8. Troubleshootingp. 66

   The projector does not turn on. Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector, and plug the power…

9. Specificationsp. 67

   Optical Resolution 1920 x 1200 Display system Single-chip DLP™ system Light source Laser diodes Electrical Power supply AC100-240V 50/60 Hz (Automatic) 7.0A…

10. Appendixp. 69

    Timing table Support video timing for HDMI input Timing Resolution H- frequency (kHz) V- frequency (Hz) Dot Clock Frequency (MHz) User Manual Supported 3D…