MSI Summit MS321UP 32 Inch Monitor user manual

Contents

1. Getting Startedp. 3

   This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded…

2. Installing the Monitor Standp. 4

   ⚠ ⚠Important •Place the monitor on a soft, protected surface to avoid scratching the display panel. •Avoid pressing the monitor when installing the monitor…

3. Installing the Monitor Hood (Optional)p. 6

   1. Unfold and align the hood to the monitor. 2. The magnetic hood will be attached to monitor automatically.

4. Adjusting the Monitorp. 7

   This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ ⚠Important Avoid touching the display panel when adjusting the…

5. Monitor Overviewp. 8
6. Connecting the Monitor to PCp. 11

   1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4.…

7. OSD Setupp. 12

   This chapter provides you with essential information on OSD Setup. ⚠ ⚠Important All information is subject to change without prior notice

8. Navi Keyp. 12

   The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: •selecting function…

9. Hot Keyp. 12

   Users may enter into preset function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive. •Users may customize their own Hot…

10. OSD Menusp. 13

    ⚠ ⚠Important The following settings will be grayed out when HDR signals are received: •Low Blue Light •Brightness •Contrast •Color Temperature •Auto Brightness…

11. P.I. (Productivity Intelligence)p. 14

    1st Level Menu 2nd/3rd Level Menu Description Auto Brightness Control OFF •Through the internal Light Sensor and AI (Artificial Intelligence) algorithm, this…

12. Professionalp. 15

    1st Level Menu 2nd/3rd Level Menu Description Mode User •All items can be adjusted by users. •Use Up or Down Button to select and preview mode effects. •Press…

13. Imagep. 17

    1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 •Default is 70. Contrast 0-100 •Default is 70. Sharpness 0-5 •Sharpness improves clarity and…

14. Input Sourcep. 19

    1st Level Menu 2nd Level Menu Description HDMI1 •Users can adjust Input Source in any mode. HDMI2 DP Type C Auto Scan OFF •Users can use the Navi Key to select…

15. PIP/PBPp. 20

    1st Level Menu 2nd/3rd Level Menu Description OFF •Enabling PIP (Picture in Picture) or PBP (Picture by Picture) will affect FreeSync, Response Time, Screen…

16. Navi Keyp. 21

    1st Level Menu 2nd Level Menu Description Up / Down / Left / Right OFF •Up Button default is Mode. •Down Button default is Design Assistance. •Left Button…

17. Settingp. 21

    1st Level Menu 2nd Level Menu Description Language 繁體中文 •Users have to press the Middle Button to confirm and apply the Language setting. •Language is an…

18. Specificationsp. 23

    Monitor Summit MS321UP Size 32 inch Panel Type IPS Resolution 3840 x 2160 @60Hz Aspect Ratio 16:9 Brightness (nits) 400 Contrast Ratio 1000:1 Refresh Rate 60…

19. Preset Display Modesp. 25
20. Troubleshootingp. 26

    The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer…

21. Safety Instructionsp. 27

    Read the safety instructions carefully and thoroughly. •All cautions and warnings on the device or User Guide should be noted. •Refer servicing to qualified…

22. TÜV Rheinland Certificationp. 29

    TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue…

23. Regulatory Noticesp. 30

    CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to…