Dell DLRT192RMBP installation instructions

Contents

1. Installation Guide Smart-UPS™ On-Line External Battery Pack SRT192BP/ SRT192BP2/SRT192BPJ/SRT192BP2Jp. 1

   Safety Messages SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the…

2. Safety Messagesp. 1

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the Smart-UPS and…

3. Product Handling Guidelinesp. 1

   DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation…

4. Safety and General Informationp. 2

   Adhere to all national and local electrical codes. • Changes and modifications to this unit not expressly approved by APC by Schneider Electric could void the…

5. Overviewp. 2

   To verify that installation of an external battery pack (XLBP) has been successful, go to the UPS display interface. Perform an Alarm Test to determine if the…

6. Specificationsp. 4

   For additional specifications, refer to the APC by Schneider Electric Web site at www.apc.com. Environmental Physical Temperature Operating 0 °C to 40 °C (32…

7. Remove Battery Modulesp. 6

   CAUTION RISK OF FALLING EQUIPMENT • The equipment is heavy. Each battery module weighs 17 kg (37 lb). • Always practice safe lifting techniques adequate for…

8. Rack-Mount Installationp. 7

   UPS model may differ in appearance from those depicted in these graphics. The XLBP installation process is identical for all models. Refer to the rail kit…

9. Tower Installationp. 9
10. Connect Ground and Battery Cablesp. 12
11. Smart Battery Managementp. 14

    Definitions • Battery Module: A string of battery cells arranged to produce a battery assembly with a connector. • Replaceable Battery Cartridge (RBC): An APC…

12. Troubleshootingp. 17

    Issues Possible Cause Solution XLBP LED flashes. • The UPS display interface is requesting XLBP status • Alarm Test has been requested by the UPS • Indicates…

13. Limited Factory Warrantyp. 18

    Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of two (2) years including…