ViewSonic ID1330 user manual

Contents

1. Safety Precautionsp. 3

   Please read the following Safety Precautions before you start using the device. • Keep this user guide in a safe place for later reference. • Read all warnings…

2. Introductionp. 6

   Package Contents • ID1330 Pen Display • Electromagnetic Pen • HDMI to Mini HDMI cable • USB Type C to USB Type C cable • USB Type C to USB Type A cable •…

3. System Requirementsp. 6

   Operating System: ͫ PC: Windows 7/8/10 (32/64 bit) ͫ Mac: macOS X 10.15 and above • CPU: ͫ Pentium 233 MHz or above • Memory: ͫ 64 MB or above • Hard disk…

4. Product Overviewp. 7

   Front and Side View 5 4 3 2 1 1. Express Keys 2. I/O Ports 3. LED Indicator 4. Power Key 5. Menu Key

5. I/O Overviewp. 7
6. Making Connectionsp. 8

   Connecting the Pen Display HDMI and USB Type C 1. Ensure the power of the computer and pen display are off before connecting them. 2. Connect one end of the…

7. Connecting the Pen Displayp. 8

   HDMI and USB Type C 1. Ensure the power of the computer and pen display are off before connecting them. 2. Connect one end of the HDMI cable to the HDMI port…

8. Driver Installation, Use, and Removalp. 10

   Installing Drivers and Software (Windows) System Requirements: Windows 7/8/10 or above. Before connecting and using the pen display, it is necessary to install…

9. Installing Drivers and Software (Windows)p. 10

   System Requirements: Windows 7/8/10 or above. Before connecting and using the pen display, it is necessary to install the below drivers and software. The…

10. Pen Input Settingsp. 12

    To adjust the pen input settings: 1. Open ViewSonic Pen Manager either by going to: Start > ViewSonic Pen Manager or selecting the ViewSonic Pen Manager icon…

11. Uninstalling the Driverp. 14

    There are two ways to uninstall the driver: • Start > ViewSonic Pen Manager > Right Mouse Click > Uninstall or • Open the Control Panel > Programs > Programs…

12. Installing Drivers and Software (MAC OSX)p. 15

    System Requirements: 10.15 or above. Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and…

13. Pen Input Settingsp. 18
14. Uninstalling the Driverp. 19

    1. Select: Go > Applications > Tablet Utility > Uninstall-Driver.app 2. Click Yes when the system asks you to remove the driver. 3. After uninstalling the…

15. Using the Pen Displayp. 20

    Turning the Device On/Off 1. Ensure the pen display is connected properly to the computer. 2. Press the Power key to turn on the pen display. 3. To turn the…

16. Turning the Device On/Offp. 20

    1. Ensure the pen display is connected properly to the computer. 2. Press the Power key to turn on the pen display. 3. To turn the pen display off, press the…

17. On-Screen Display (OSD) Menup. 21

    Press the Menu key to activate the On-Screen Display (OSD) Menu. Brightness Brightness Contrast Eco Mode DCR Standard Off 80 50 Menu Description Brightness…

18. Configuring the Settingsp. 22

    General Operations 1. Press the Menu key to display the On-Screen Display (OSD) Menu. 2. Press the d or c key to select the main menu. Then press the Menu key…

19. Appendixp. 25

    Specifications Item Category Specifications LCD Type TFT Active Matrix 1920 x 1080 LCD, Display Size 33.02 cm, 13” Surface Treatment Hard-coating (8H)…

20. Specificationsp. 25

    Item Category Specifications LCD Type TFT Active Matrix 1920 x 1080 LCD, Display Size 33.02 cm, 13” Surface Treatment Hard-coating (8H) Resolution Supported…

21. Troubleshootingp. 26

    This section describes some common problems that you may experience when using the monitor. Problem or Issue Possible Solutions No picture on the display •…

22. FAQp. 27

    Question Possible Solutions How to find out whether the driver was installed properly? • After the driver was properly installed, and when the tablet and…

23. Maintenancep. 28

    General Precautions • Make sure the display is turned off and unplugged. • Never spray or pour any liquid directly onto the screen or case. • Handle the…

24. Replacing a Pen Nibp. 29

    When the pen nib gets too short or develops a sharp edge, it can be replaced with spare nibs. To replace a pen nib: 1. Use the nib removal tool to pull the old…

25. Regulatory and Service Informationp. 30

    Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer…

26. Compliance Informationp. 30

    This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels…

27. Copyright Informationp. 33

    Copyright© ViewSonic® Corporation, 2021. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the…