BenQ SH753P (9H.JGJ77.2JE) user manual

Contents

1. Important safety instructionsp. 3

   Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to…

2. Introductionp. 7

   Introduction Projector features The projector offers the following features • SmartEco™ starts your dynamic power saving The SmartEco™ technology offers a new…

3. Positioning your projectorp. 17

   Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the…

4. Connectionp. 19

   When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for…

5. Operationp. 22

   Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that…

6. Maintenancep. 57

   Maintenance Care of the projector Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never…

7. Troubleshootingp. 65

   Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector…

8. Specificationsp. 66

   Projector specifications All specifications are subject to change without notice. Optical Resolution SH753P 1920 X 1080 1080P Display system Single-chip DLP™…

9. Warranty and Copyright informationp. 74

   Warranty and Copyright information Limited warranty BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.…

10. PJLinkp. 75

    PJLink PJLink protocal The network function of this projector support the PJLink class 1, and the PJLink protocal can be used to perform projector setting and…