ASUS RNUC14MNK9700002 (90AR00M2-M00080) user manual

Contents

1. Safety and Caution informationp. 6

   Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories from other products…

2. Front viewp. 8

   Rear view Power button USB 10Gbps port USB 10Gbps Type-C ® port DisplayPort USB 10Gbps port USB 10Gbps Type-C ® port with DisplayPort Headphone/Headset/…

3. Rear viewp. 8

   Power button USB 10Gbps port USB 10Gbps Type-C ® port DisplayPort USB 10Gbps port USB 10Gbps Type-C ® port with DisplayPort Headphone/Headset/ Microphone jack…

4. NUC Mini PC Setup Guidep. 9

   Connecting the display HDMI™ port DisplayPort Type-C® DisplayPort

5. Connecting the displayp. 9

   HDMI™ port DisplayPort Type-C® DisplayPort

6. Connecting the keyboard and mousep. 11
7. Connecting the LAN cablep. 12

   LAN port LED indications: Link LED Speed LED Speed LED Status Description OFF 100 Mbps / 10 Mbps connection YELLOW 1 Gbps connection GREEN 2.5 Gbps connection…

8. Connecting the power adapterp. 13

   NOTE: Please refer to the following for more information on the adapter and the system: 65W Power adapter • Input voltage: 100-240 Vac • Input frequency: 50-60…

9. Powering on the systemp. 15

   NOTE: To view the current power management settings in Windows ® 11, click the Start Button. Type Power Management, then press <Enter>. Default settings on a…

10. NUC Component Integration Guidep. 17

    IMPORTANT! ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation

11. Safety precautionsp. 17

    This device is intended for use in ambient temperatures between 0°C and 35°C (32°F and 95°F). Avoid using or storing next to heat sources, in direct sunlight…

12. Care during usep. 18

    Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a…

13. Before you beginp. 19

    1. Read the entire manual before starting any service procedures and follow all instructions. 2. Back up your NUC system. 3. Turn off your NUC system. 4. Place…

14. Opening systemp. 20

    1. Loosen the four (4) screws on the bottom of the system. 2. Remove the bottom cover.

15. DDR5 SO-DIMM Installationp. 21

    1. Align the small space at the bottom edge of the DDR5 SO-DIMM with the key on the SO-DIMM slot, then insert the DDR5 SO-DIMM into the SO-DIMM slot. 2. Push…

16. M.2 Installationp. 22

    2280 M.2 1. Insert the M.2 module into the M.2 slot on the system board. 2. Rotate the Q-Latch counterclockwise to secure the M.2 module in place.

17. Closing systemp. 25

    1. Place and align the bottom cover to the chassis. NOTE: Ensure the FRONT indication on the bottom cover is aligned to the front of the system. 2. Secure the…

18. VESA Mount Installationp. 26

    2. Attach the two (2) bundled slightly larger black screws to the bottom chassis cover of the NUC system.