Loading manual…
HP Jet Fusion 3D 4210 Printer (2YG73A) user manual
- Type
- User manual
- Language
- English
- Pages
- 24
- Category
- Printers
- Models
- 2YG73A
Open PDFOpens the file on objects.icecat.biz.
Contents
- About Command Centerp. 5
HP Smartstream 3D Command Center is a client application that fully monitors your HP 3D printers, and all other complementary devices such as processing…
- Quick startp. 6
After installing, connecting, and setting up the application, you will see the following window, showing information about the various devices that you have…
- Download the applicationp. 6
You can download HP SmartStream 3D Command Center (Client and Server) from http://www.hp.com/go/ SmartStream3DCommandCenter/manual. Operating systems •…
- Connect to a serverp. 7
Once the printer and the assigned computer are connected to your local network and to the HP Cloud, open the HP SmartStream 3D Command Center Client that you…
- Add your first HP 3D printerp. 7
Complete the printer configuration in Device management > Add device. To add a new device, you need to connect to PrintOS. If you already have an account…
- Start monitoring your printerp. 8
If you completed the above steps successfully, your first device is added to the monitoring area. For more information, see Monitoring basics on page 15. 4…
- Set up preferencesp. 9
General preferences Select your preferred language and units from the drop-down menus
- General preferencesp. 9
Select your preferred language and units from the drop-down menus
- Network connectivityp. 9
In the Network connectivity tab, you can manage servers, connect to a proxy server, or run network diagnostics. Manage servers On the Server tab you can see a…
- Device managementp. 11
Add a device To add a printer or processing station, see Add your first HP 3D printer on page 3. To add a build unit, you need to fill in only two fields: •…
- Access and securityp. 12
Network connection security • Device data are accessed through HTTPS from HP SmartStream 3D Command Center Servers using the Web Services from the devices. •…
- Network connection securityp. 12
Device data are accessed through HTTPS from HP SmartStream 3D Command Center Servers using the Web Services from the devices. • Data connections to the cloud…
- Network and computer requirementsp. 13
Network requirements • Use hostnames or static IP addresses in devices and in the Command Center Server computer, which will prevent disconnections due to…
- Connectivity troubleshootingp. 14
Cannot connect to proxy server If your network uses a corporate proxy server, you may see an error alert when you first install Command Center, showing that…
- Monitoring basicsp. 19
Each device is represented by a card that summarizes the most important information about the device. By default, the build status information is shown. The…
- Types of devicesp. 21
Command Center can monitor all models of 3D printers, processing stations, build units, and cooling frames. 3D printers 3D printers have the following…
- Device alertsp. 23
Cards may display warnings or errors, which may override the printer status, depending on their importance, which is determined by the printer. • Warnings are…
- Notification centerp. 24
Click to open the panel. The number of unread messages is displayed beside the icon. To close the panel, click again, or click anywhere else outside the…
- Types of notificationsp. 24
New versions available • Software updates are notified through the notification center; you can install new versions automatically. • If there is a firmware…