Dell R430 (210-ADLO) user manual

Contents

1. Dell PowerEdge R430 Owner's Manualp. 3
2. About your systemp. 8

   The Dell PowerEdge R430 is a rack server that supports up to two processors based on the Intel Xeon EP E5-2600 v3 family, up to 12 DIMMs, and up to ten hard…

3. Performing initial system configurationp. 25

   After you receive your PowerEdge system, you must set up your system, install the operating system if it is not pre-installed, and set up and configure the…

4. Pre-operating system management applicationsp. 28

   The pre-operating system management applications for your PowerEdge system help you manage different settings and features of your system without booting to…

5. Installing and removing system componentsp. 49

   Safety instructions WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.…

6. Troubleshooting your systemp. 133

   Safety first—for you and your system CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and…

7. Using system diagnosticsp. 146

   If you experience a problem with your system, run the system diagnostics before contacting Dell for technical assistance. The purpose of running system…

8. Jumpers and connectorsp. 148

   System board jumper settings For information about resetting the password jumper to disable a password, see Disabling a Forgotten Password. Table 21. System…

9. Technical specificationsp. 152

   Table 23. Physical specifications Physical Height 42.8 mm (1.68 inch) Width With rack latches 482.4 mm (18.99 inch) Without rack latches 434.0 mm (17.08 inch)…

10. Getting helpp. 158

    Contacting Dell Dell provides several online and telephone-based support and service options. If you do not have an active Internet connection, you can find…