Loading error codes…
Loading error codes…
Washing machines
13 codes from the official LG WT7005CW user manual, in the manual’s own words.
UNBALANCE ERROR The load is too small. • Add additional items to allow the washer to balance the load. Heavy articles are mixed with lighter items. • Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. The load is out of balance. • Manually redistribute the load if articles have become tangled, preventing the automatic rebalancing from working properly.
Page 37 of the manual →INLET ERROR Water supply faucets are not fully open. • Make sure that the water faucets are fully open. Water inlet hoses are kinked, pinched, or crushed. • Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer during cleaning or maintenance. Water inlet filters are clogged. • Clean the inlet filters. See MAINTENANCE. Water supply pressure to faucet or house is too low. • Check another faucet in the house to make sure that household water pressure is adequate and flow is not restricted. • Disconnect the water inlet hoses from…
Page 37 of the manual →WATER OUTLET ERROR Drain hose is kinked, pinched, or clogged. • Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. The end of the drain hose is more than 96 inches (2.4 m) above the bottom of the washer. • Move the end of the drain hose so that it is lower than 96 inches (2.4 m).
Page 37 of the manual →CONTROL LOCK FUNCTION The control lock function is on to prevent anyone from changing cycles or operating the washer. • Turn off the control lock function in the control panel. See Control Lock under Options and Extra Functions. dr DRAIN FEATURE Special drain feature • If the washer is paused during a cycle for more than 4 minutes, the cycle will be canceled and any water remaining in the tub will be drained. • This is not an error code. It indicates that the drain function is operating.
Page 38 of the manual →LID ERROR Lid is not closed properly. • Close the lid properly. • If the lid is closed and this error message is still displayed, call for service.
Page 38 of the manual →LID LOCK ERROR Lid is not locked properly. • Make sure that the lid is closed properly and press the Start/Pause button. You can hear the locking sound to lock the lid in the beginning of the cycle. The washer will not operate unless the lid is locked. • Make sure that nothing is caught under the lid, including shipping material or clothing. • Make sure that the latch mechanism is fully retracted. • If the lid is closed and this error message is still displayed, call for service.
Page 38 of the manual →FOREIGN OBJECT ERROR Foreign objects such as coins, pins, clips, etc., are caught between the pulsator and the inner tub. • Turn the washer off then on again. Press the Spin button without selecting a cycle to drain and spin the load. • When the Spin cycle is completed, empty the tub and find and remove any objects caught in the pulsator. • Always check pockets, etc., before washing to prevent error codes or damage to the washer or clothing. • For some models, LE is displayed first, then the 1 is displayed. tcL TUB CLEAN ALARM It is time to run the Tub Clean cycle. • This is not an error…
Page 38 of the manual →TEMPERATURE SENSOR ERROR Control error • Unplug the washer and wait 60 minutes. Reconnect power and try again. • If the error code is still displayed, call for service.
Page 38 of the manual →OVERFLOW ERROR Water level is too high due to a faulty water valve. • Close the water faucets, unplug the washer, and call for service.
Page 38 of the manual →PRESSURE SENSOR ERROR The water level sensor is not working correctly. • Close the water faucets, unplug the washer, and call for service.
Page 38 of the manual →MOTOR LOCKED ERROR A motor error has occurred. • Allow the washer to stand for 30 minutes and then restart the cycle. • If the error code is still displayed, call for service.
Page 39 of the manual →CLUTCH ERROR Clutch error • Mechanical failure • Unplug the washer and call for service.
Page 39 of the manual →SUPPLY VOLTAGE ERROR Supply voltage is not correct. • Please call LG service center. You can find your local LG service center phone number on the back cover page.
Page 39 of the manual →Code not listed or still showing? See all LG WT7005C manuals or contact LG service.