Loading error codes…
Loading error codes…
27 White WashTower · Dryers
10 codes from the official LG WKE100HVA user manual, in the manual’s own words.
INLET ERROR Water supply connected with leak-limiting hoses. • The use of hoses designed to limit leaks is not recommended. Leak limiting hoses can trip falsely and prevent the washer from filling.
Page 68 of the manual →UNBALANCE ERROR The load is too small. • Add additional items to allow the washer to balance the load. Heavy articles are mixed with lighter items. • Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. The load is out of balance. • Manually redistribute the load if articles have become tangled, preventing the automatic rebalancing from working properly. dE, dE1, dEz, dE4 DOOR OPEN ERROR The door is not secured. • Close and secure the door. If the message keeps appearing, unplug the power cord and call for service.
Page 68 of the manual →WATER OUTLET ERROR Drain hose is kinked, pinched, or clogged. • Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. The end of the drain hose is more than 96 inches (2.4 m) above the bottom of the washer. • Move the end of the drain hose so that it is lower than 96 inches (2.4 m).
Page 68 of the manual →TEMPERATURE SENSOR ERROR Control error. • Unplug the power cord and call for service.
Page 68 of the manual →OVERFLOW ERROR Water level is too high due to a faulty water valve. • Close the water faucets, unplug the washer, and call for service.
Page 68 of the manual →PRESSURE SENSOR ERROR The water level sensor is not working correctly. • Close the water faucets, unplug the washer, and call for service.
Page 68 of the manual →MOTOR LOCKED ERROR A motor error has occurred. • Allow the washer to stand for 30 minutes and then restart the cycle. • If the error code is still displayed, call for service. svd OVERSUDSING DETECTION Oversudsing of detergent • Do not add more than the manufacturer’s recommended amount of detergent. • If too many suds are detected during spinning, the washer stops to help prevent leaking.
Page 68 of the manual →POWER FAILURE Power failure or inadequate electrical service may have occurred during operation. • Press the Start/Pause button to restart the cycle.
Page 68 of the manual →FROZEN ERROR Inlet hose, drain hose or drain pump is frozen. • See Care in Cold Climates.
Page 68 of the manual →CONTROL LOCK FUNCTION The Control Lock function is on to prevent anyone from changing cycles or operating the washer. • Turn off the Control Lock function in the control panel. See Control Lock under Options and Extra Functions. tcL TUB CLEAN ALARM It is time to run the Tub Clean cycle. • This is not an error code. It indicates that the Tub Clean cycle is running or needs to be run to clean the washer drum.
Page 68 of the manual →Code not listed or still showing? See all LG WKG101HWA manuals or contact LG service.