Loading error codes…
Loading error codes…
Transitional Induction Range 30 Inch · Ovens & ranges
12 codes from the official Dacor Transitional Induction Range 30 Inch (DOP30T940ISDA) user manual, in the manual’s own words.
The oven sensor is open when the oven is operating. The oven sensor is short when the oven is operating.
Page 113 of the manual →This code occurs if the internal temperature rises abnormally high. Restart the appliance.
Page 113 of the manual →The Sub PCB sensor is open when the oven is operating. Turn both the mode and temperature selector knobs to Off, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. The Sub PCB sensor is short when the oven is operating.
Page 113 of the manual →The temperature probe sensor is short when the oven is operating. Turn the burner knob to Off, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
Page 113 of the manual →The PCB sensor is open when the oven is operating. The PCB sensor is short when the oven is operating. DG68-01667A-00_IB(FULL)_DOP30T940IS_EN+MES+CFR.indb 113 DG68-01667A-00_IB(FULL)_DOP30T940IS_EN+MES+CFR.indb 113 2024-12-17 오후 2:00:15 2024-12-17 오후 2:00:15
Page 113 of the manual →This code occurs if the PCB temperature rises abnormally high. Call for service C-A2 The cooling motor is operating abnormally. Call for service. Cooktop Displayed code
Page 114 of the manual →This code occurs if communication between the Induction Main and Left Inverter PBA is interrupted. Power Off, and then Power On to the setting you want again. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
Page 114 of the manual →The top sensor is open when the burner is operating. Call for service. The top sensor is short when the burner is operating.
Page 114 of the manual →The IGBT sensor is open when the burner is operating. The IGBT sensor is short when the burner is operating.
Page 114 of the manual →This code appears if the internal temperature of a burner rises abnormally high. Power Off, and then Power On to the setting you want again. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
Page 115 of the manual →UP The voltage is too high or low. Check the power connection and make sure to turn the appliance on after regulating the voltage.
Page 115 of the manual →Communications between main and EEP-ROM failed. Restart the appliance using the POWER key. If the problem continues, disconnect power for more than 30 seconds. Then, restart the appliance. If the problem still continues, contact a local Samsung service center. DG68-01667A-00_IB(FULL)_DOP30T940IS_EN+MES+CFR.indb 115 DG68-01667A-00_IB(FULL)_DOP30T940IS_EN+MES+CFR.indb 115 2024-12-17 오후 2:00:15 2024-12-17 오후 2:00:15
Page 115 of the manual →Code not listed or still showing? See all Dacor DOP30T940ISDA manuals or contact Dacor service.