Loading error codes…
Loading error codes…
Transitional 30 Inch Combination Wall Oven · Ovens & ranges
5 codes from the official Dacor Transitional 30 Inch Combination Wall Oven (DOC30T977DSDA) user manual, in the manual’s own words.
The temp probe sensor is short when the oven is operating. Press CANCEL, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
Page 81 of the manual →The PCB sensor is open when the oven is operating. The PCB sensor is short when the oven is operating.
Page 81 of the manual →This code occurs if the PCB temperature rises abnormally high. Call for service
Page 81 of the manual →The steam sensor is open when the oven is operating Press CANCEL, and then restart the oven. If the problem presists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If does not solve the problem, call the service. The steam sensor is short when the oven is operating
Page 81 of the manual →There are drain system-related problems. C-A2 The cooling motor is operating abnormally. Call for service. Warranty and Service Getting Help Before you request service: you request service: 1. Review the Troubleshooting section of this manual (see page 74). 2. Use the helpful tips found in our Troubleshooting. 3. Become familiar with the warranty terms and conditions of your product. 4. If none of these tips or suggestions resolves your problem, call our Customer Service center at the number below. Dacor’s Customer Service center is available : Mon – Fri, 8:00 a.m. to 8:00 p.m. Pacific Time…
Page 81 of the manual →Code not listed or still showing? See all Dacor DOC30T977DSDA manuals or contact Dacor service.