To clean your machine between uses, follow these steps below:
- Turn Machine Off
- Sit machine upright on a flat surface and remove dirty water tank
- Empty Dirty Water Tank by opening the plug and emptying the contents
- Rinse Dirty Water Tank under water and set aside to dry
- Remove Formula Tank by grabbing both sides and pulling outward
- Remove Suction Lens by raising latch at the top and pulling outward
- Rinse Suction Lens under water, wipe any debris from the front of the machine
- Let dry
- Put Suction Lens back onto machine
- Attach front lip to front of the machine by the brush roll, rotate lens towards machine until it clicks into place
- Put Formula Tank back onto machine until it clicks into place
- Put Dirty Water Tank back on machine by aligning the bottom of the tank with the hook on the machine
- Rotate the tank forward until the latch has clicked into place
- To clean the brush roll and brush roll chamber > Go to Brush Roll Maintenance
