TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts Installation Guide - Manualsnap

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts Installation Guide

Quick Installation Guide (TL114/TL115)

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-qr

https://turbolock.com/tl115-smart-door-lock-with-keypad-voice-prompts-and-app/

Install the latch before starting the following steps.

(Refer to complete user manual on pages 9, 12.)
a. Use a screwdriver to extend the bolt. (Fig. 1)
b. The bolt must be EXTENDED prior to installing the lockset. (Fig. 2)

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-fig1

Install the outside section:

a. Gently feed the power cable through a diameter hole carefully over the latch. (Fig. 3)
b. Adjust the latch pin to a HORIZONTAL position, then Insert it into the center hole of the latch. (Fig. 3)
TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-iconEnsure the bolt is EXTENDED and the latch pin is HORIZONTAL when installing the outside section.
TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-iconDo NOT force the cable’s connector end through any part of the lock. Damaging the connector may make the lock unusable.

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-fig3

Install the inside section:

a. Hold the outside section then continue the installation on the inside section. If needed, have someone hold the outside section to help you complete the following steps.
b. Remove battery compartment cover. (Fig. 4) Then carefully connect the two power cables. (Fig. 5) Ensure the connector is seated properly and firmly.
c. Adjust the thumb of an inside section to VERTICAL. (Fig. 6)

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-fig4

d. Assemble the inside section on the door by aligning mounting holes on the latch and inside section. Ensure the latch pin Is HORIZONTAL %Olen Inserting it Into the Inside section. Then secure the inside section on the door with mounting screws. (Fig. 7)
e. Install the 9V alkaline battery (Fig. 8) and cover the battery compartment to complete the installation. (Fig. 9)

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-fig7

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-iconMake sure the positive and negative electrodes of the battery is installed properly,
TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-iconDo not close the doe, until the installation is completed and the lock is fully tested. It’s highly recommended to first use the default passcode to test the lock. After fully testing the lock, be sure to change the default admin passcode.
TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts-iconIf the lock doesn’t work properly, please disassemble and follow the above instructions to install again.

Documents / Resources

TURBOLOCK TL114 Smart Lock with Keypad and Voice Prompts [pdf] Installation Guide
TL114, TL115, TL114 Smart Lock with Keypad and Voice Prompts, Smart Lock with Keypad and Voice Prompts, Smart Lock, Keypad and Voice Prompts Smart Lock

Related Manuals for Honeywell Aquastat L8148A

Yale Smart Lock User Guide
Yale Smart Lock User Guide

Yale Smart Lock User Guide

schlage keypad lock manual
schlage keypad lock manual

schlage keypad lock manual

SCHLAGE BE365 PLY 619 Keypad Deadbolt Instruction Manual
SCHLAGE BE365 PLY 619 Keypad Deadbolt Instruction Manual

SCHLAGE BE365 PLY 619 Keypad Deadbolt Instruction Manual

Keypad Deadbolt BE365 Installation Manual
Keypad Deadbolt BE365 Installation Manual

Keypad Deadbolt BE365 Installation Manual

Schlage Conneted Touchscreen Lock BE468 User Manual
Schlage Conneted Touchscreen Lock BE468 User Manual

Schlage Conneted Touchscreen Lock BE468 User Manual