Heyday True Wireless Earbuds
Heyday True Wireless Earbuds
hey! welcome to your Heyday true wireless earbuds. let’s get you set up
How to wear earbuds
Take the earbuds out from the charging case.
The left earbud has an “L” and the right earbud has an “R” marked on it.
Place the left/right earbud in the left/right ear as indicated in the illustration. Ensure the speakers are pointed upwards when placing them in your ears.
Included
- Charging case
- Wireless earbuds
- 3 Sets of silicon ear tips (S/M/L with M on the earbuds)
- USB-C type charging cable
Pairing
- Remove the earbuds from the charging case to power on. If the earbuds are not stored inside the charging case or are turned off, press and hold both earbuds for 1.5 seconds to power on.
- Use Bluetooth settings on your phone to pair with HEYDAY EARBUD 04.
- The right earbud will start flashing white/red light rapidly while connecting to your phone.
- The left earbud will emit a steady white light – pairing successful.
- Place the earbuds back in the charging case to power off or press and hold both earbuds for 4 seconds to power off.
Indicators charging case
- Left White flashing rapidly – Battery low
- 1 Steady White – Battery charged for 25%
- 2 Steady White – Battery charged for 50%
- 3 Steady White – Battery charged for 75%
All 4 Steady White – Charging complete
Phone call function
- When you receive an incoming call, the left earbud will flash white.
- Single press the left or right earbud to answer the incoming call, press the left or right earbud again to hang up after the call.
- Press and hold the left or right earbud for 1.5 seconds to reject the incoming call.
- The music will automatically pause when a call comes in and will resume playing after the call has ended.
Music function
- Press the left or right earbud to play or pause the music.
- Double press the left earbud to play the previous track.
- Double press the right earbud to play the next track.
Note: since the right earbud is set as default, the left earbud cannot be used in mono mode.
Voice assistant function
- Press and hold the left or right earbud for 1.5 seconds to enable or disable the voice assistant /
Siri function.
Charging earbuds
- Make sure the earbuds are fully charged prior to the first use.
- Approximately 1.5 hours are required to fully charge the earbuds.
- Charging is complete when red light turns off.
- Place the earbuds in their respective slots inside the charging case to start charging them. The left and right earbuds emit a steady red light while charging. When the earbuds are fully charged the lights turn white.
Recharging charging case
- When the left light on the charging case rapidly flashes white, the battery of the charging case is on low power and needs to be charged.
- Approximately 1.5 hours are required to fully charge the charging case.
- Plug the male end of the USB-C type charging cable into the female port of the charging case.
- Plug USB end of charging cable into a DC 5V USB power supply.
- The lights flash white while charging. Once the charging case is fully charged all 4 lights will turn a steady white.
Resetting earbuds
Place the earbuds in the charging case and press the reset button of the charging case. After 6 seconds, the earbuds will turn on and off again, indicating the reset.
Troubleshooting and tips
- If the earbuds are not working correctly, turn them on/off.
- If the earbuds won’t turn on, recharge the battery and try again.
- If the earbuds won’t charge, make sure the charging case battery is not empty. “charging case battery”is fine – omit apostrophe!!
- If the charging case won’t charge, make sure the supply is 5V>1A, that it is functioning properly and not damaged.
- If the earbuds make no sound adjust the volume by turning it up.
- If the earbuds make no sound or do not show as an available device, make sure they are not paired to another device. If so, unpair the device and re-pair the desired device.
- This device does not have a pairing code. If prompted for one, make sure you are connecting to the correct device. If you are, then“forget“ the device and re-pair. If you nevertheless receive a prompt, then enter 0000.
NOTE:
The unit will power off it is not used for more than 5 minutes.
If the Bluetooth connection range is more than 10 meters the earbuds will disconnect with a prompt sound, indicating that the connection has been lost. If the connection is not re-established within 2 minutes, the earbuds will turn off automatically.
Need some help?
Can’t get it to pair? Have a question or comment?
call us at: 877-698-4883 or: 877-MyTgtTech
online at: TargetTechSupport.com
Safety
- Do not use near any water source
- Do not modify or repair this device
- Do not use in high temperatures or extreme weather
- Do not use chemical detergents to clean your device, use a soft dry cloth Keep 5-10 inches between microphone and mouth when using the phone call function
FCCID: 2AVTM-TT2107
Model: TT2107
Input: 5V Max 1A Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Target Corp.Mpls.MN,55403 Phone:1-612-304-6073
Downloads
Heyday True Wireless Earbuds Manual – Original [pdf]
Heyday True Wireless Earbuds Manual – Optimized [pdf]
FAQ’S
The earbuds can play music for up to 3 hours on a single charge and the charging case can charge the earbuds for up to 2 times.
Pairing
Remove the earbuds from the charging case to power on. …
Use Bluetooth settings on your phone to pair with HEYDAY EARBUD 04.
The right earbud will start flashing white/red light rapidly while connecting to your phone.
The left earbud will emit a steady white light – pairing successful.
Use the Volume Up button to increase the volume. Use the Volume Down button to decrease the volume. Push and hold the Phone button on the remote.
If the earbuds are not working correctly, turn them on/off. If the earbuds won’t turn on, recharge the battery and try again. If the earbuds won’t charge, make sure the power supply works, is 5VAA, and is not damaged. If the earbuds make no sound, adjust the volume.
The reason this may be happening is because of the buildup in the earbud of earwax and dirt. These things can get into the mesh of the earphone and disrupt the flow of volume. This makes one earbud sound louder than the other.
True Wireless Earbuds Noise Cancelling with 4 Microphones, WENKEY Bluetooth Headphones with 5 Sizes Tips for iPhone, Android, 30H Playtime, TWS Bluetooth Earphones with Charging Case.
six hours
Taking the hassle out of listening, these wireless earphones stay out of the way and keep you jamming for more than six hours without interruption. Whether you’re at the gym, commuting to work or going for a run, these in-ear wireless headphones will take you through your day without ever missing a beat. hey, you.
From listening to music to tuning into podcasts to catching up on the latest shows, these earbuds will let you do it all whether you’re at home or on the go. The in-line controller gives you control, and the mic lets you easily answer or make phone calls hands free.
Battery is low on headset, and will need to be charged soon to continue using it.
Check if the charging port is loose or damaged.
Inspect the charging port of your headphones for any damage like bent connectors or bent metal. Also, make sure that the port itself isn’t loose when you touch it, as this could be a sign that the connectors have detached from the headset.
Push and hold the Power button on the back of the right earcup for seven seconds. The Indicator Light on the back of the left earcup with flash red and white
There are many issues that can cause one earbud not to work. Some are simple fixes, like Bluetooth pairing problems or a device that simply needs to be cleaned or reset. Other issues are more challenging to resolve, like a short circuit, frayed wiring, or water-damaged devices.
VIDEO
