AFTERSHOKZ OpenMove Wireless Open-Ear Headphone
AFTERSHOKZ OpenMove Wireless Open-Ear Headphone
OVERVIEW
 |  |  |
How to Set Up Open Move
- Charge
Charge the headphones with the included USB-C charging cable. The LED indicator will change from red to blue when charging is complete. - Pair
Begin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue. - Connect
Open your device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.
Let us take care of you! Protect your headphones against defects.
Make sure to register your OpenMove at Aftershokz.com
Multifunction Button (A)
| Function | Action | Prompt / “Audrey Says™” |
| Play/pause music | Click once | One beep |
| Skip to the next song | Double-click
while music is playing | One beep |
| Skip to the previous song | Triple-click while music is playing | One beep |
| Switch language | Double-click while on pairing | English |
| Answer call | Click once | Two beeps |
| End call | Click once | One beep |
| Answer call waiting and hang up on current caller | Press and hold for 2 seconds | One beep |
| Reject a call | Press and hold for 2 seconds | Two beeps |
| Activate device’s voice assistant | Press and hold for 2 seconds | Device beep |
| Redial last number | Double-click (when idle) | “Redial last number” |
Volume+ / Power Button (B); Volume- Button (C)
| Function | Action | Prompt / “Audrey Says™” |
| Power on | Press and hold volume+ for 2 seconds | “Welcome to AfterShokz” |
| Power off | Press and hold volume+ for 3 seconds | “Power off” |
| Mute | Press and hold both buttons for 2 seconds while on a call | “Mute on” or “Mute off” |
| Switch EQ | Press and hold both buttons for 3 seconds while music is playing | “Standard mode / Vocal booster mode / Earplug mode”
|
| Check battery status | Click the volume+ or volume button while music is paused | “Battery high/Battery medium/ Battery low/Charge me” |
|
Adjust volume | Click the volume+ or volume- button to adjust volume while music is playing | One beep |
Specifications
| Model number | AS660 | Frequency response | Frequency response |
| Speaker type | Bone conduction transducer | Speaker sensitivity | Speaker sensitivity |
| Bluetooth® version | Bluetooth® v5.0 | Microphone sensitivity | -40 ± 2dB |
| Wireless range | 10 m | Frequency band | 2402 – 2480MHz |
| Battery | Rechargeable Li-Polymer battery | Battery capacity | 135 mAh |
| Continuous play | Up to 6 hours | Standby time | Up to 10 days |
| Charge time | 2 hours | Charge voltage | 5.25V ± 5% |
| Charge type | USB-C | Speaker impedance | 8.0 ± 0.5ohm |
| Water resistance | IP55 | Maximum RF output power | 4dBm |
| Weight | 29 g | Warranty | 2 years |
| Compatible profiles | HSP, HFP, A2DP AND AVRCP | ||
LED Indicator
| Solid red | Charging |
| Solid blue | Charging complete |
| Flashes red and blue | Pairing mode |
| Flashes blue | Incoming call |
| Flashes red every 2 minutes | Low battery |
Multipoint Pairing
Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.
- Begin with your headphones powered off.
- Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
- Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled”.
- Open your first device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
- Turn your headphones off.
- Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
- Open your second device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
- Turn your headphones off.
- Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
- To turn off multipoint pairing: Press and hold the multifunction and volume – buttons for 3 seconds when pairing. Audrey says”multipoint disabled”.
More information: bit.ly/aftershokzpairing
How to Reset Your Headphones
- Begin with your headphones powered off.
- Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
- Press and hold the multifunction button, volume+ button, and volume- button(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
- Turn your headphones off. OpenMove is now reset and can be re-paired to your device.
Optional Accessories
Earplugs (D)
Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.
- Roll earplugs firmly between fingers and place in ears.
- To adjust EQ settings for earplugs, press and hold volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
- Switch EQ to other settings when you take out the earplugs.
Manufacturer
AfterShokz LLC
3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758
8000500039(A0)
Pdf Download Resources
- AFTERSHOKZ OpenMove Wireless Open-Ear Headphone [pdf] User Guide
- Read more: https://www.manualsnap.com/aftershokz/openmove-wireless-open-ear-headphone-manual#ixzz7cupOPJlg
FAQ’S
Make sure your headphones are fully charged. If they still won’t charge, please contact us at 1-800-843-4287 and we will be happy to assist you.
Make sure your headphones are powered off. If they still won’t pair, please contact us at 1-800-843-4287 and we will be happy to assist you.
Make sure your device is in pairing mode and that the OpenMove is powered off. If they still won’t connect, please contact us at 1-800-843-4287 and we will be happy to assist you.
OpenMove are rated IP55 in terms of waterproofness, therefore, they can be exposed to light sweat/ moisture and dust but we do not recommend showering with them.
No, they are water-resistant but not waterproof. You could and almost definitely would damage these in the shower. They might work in a bath if you’re not going to dunk your head.
Yes, I have two Aftershokz headphones, including the OpenComm headset, and they both pair easily with my Apple iphone and mini ipad.
Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.
Believe it or not, many people use their AfterShokz headphones to sleep! Turn out the lights, throw on some white noise, and get comfy. If you sleep with a snoring partner or you have pets running around that could disturb your shut-eye, your earplugs will definitely come in handy!
The right earpiece features two buttons to control the volume. The volume-up button also doubles as the power button. Long-press it to turn the device on and off—which you’ll want to remember, since the headphones don’t turn themselves off automatically.
The volume up and down buttons. Pressing and holding the volume up turns the headset on or off. Pressing both for two seconds will mute/unmute the mic when on a call.
You can check the battery status by powering on your headphones and clicking volume+ or volume- while no music is playing. Audrey will say “Battery High,” “Battery Medium,” “Battery Low” or “Charge Me.”
Purple light means it’s dead.
Unplug the headphones from their charging port. Press and hold the power button for 10 seconds. Wait for the LED light to blink to indicate that you have successfully reset your headphones.
VIDEO
www://uk.shokz.com/
Documents / Resources
 | AFTERSHOKZ OpenMove Wireless Open-Ear Headphone [pdf] User Guide OpenMove, Wireless Open-Ear Headphone, Wireless Headphone |
YouTube
샥즈 ê³µì‹ í™ˆíŽ˜ì´ì§€ - shokz ê³¨ì „ë„ ì´ì–´í°
